- Contact Person : Mr. Zhang Lin
- Company Name : Anhui Hecha Forklift Co., Ltd.
- Tel : 86-551-3676750
- Fax : 86-551-3676860
- Address : Anhui,hefei,ziyun road economic and technological development area ,hefei
- Country/Region : China
- Zip : 230601
5ton hydraulic DIESEL FORKLIFT CPCD50L
NO1.Advantages:
This new series forklifts with the latest technical design will provide you excellent operating performance, and make your work handier by their high standard performance driving experience and the simple and safe operation
Environemntal friendly
-The emission meets EC new regulation
-High efficiency hydraulic system to lower the fuel consumption
-Using environmental friendly material
-Damping device on the mast to reduce impact and vibration
-Sound insulating and absorbing device are used to reduce the noise
Ergonomics design
-Using lever right located to reduce footplate strength
-Control lever right located to effectively reduce drivers arm tiredness
-Dual combined switch lever as a car to enable easy operating
-Wide mast with good visibility
-Wide space for boarding and driving, increasing leg space
-Engine automatic monitor control, when the engine oil pressure is too low or water temprature is too high, the engine will be automatically shut off
Safety performance
-Enclose cabin is made of assembling steel plate, high strength overhead is designed to ensure the safety
-Parking brake with safety protection device, when parking brake is working, the forklift will not move even the direction lever is turned
-Safety device in mast hydraulic system prevents material falling down in case of hose broken
-High pressure hose is designed far away from the driver
-Safety wire harness, using waterproof plug
NO2.Main specification
| Model | unit | CPCD50L |
| Load capacity | kg | 5000 |
| Load center | mm | 500 |
| Operating at maximum height | mm | 4230 |
| Mast tilt angle | º | 6/12 |
| Hold under mast (min ) | mm | 160 |
| Turning radius(min) | mm | 2800 |
| Drive speed(F/B)max | km/h | 19/11 |
| Lifting speed(max) | mm/s | 380/430 |
| Falling speed | mm/s | 380 |
| Gradeability | % | 18 |
| complete size (L*W) | mm | 4215*1480 |
| Fork size (L*W*T) | MM | 1070*150*50 |
| Closed mast height | mm | 2245 |
| Overhead guard height | mm | 2350 |
| Fork spacing adjustment | mm | 300-1340 |
| Wheel base | mm | 2000 |
| Wheel distance (F/B) | mm | 1180/1190 |
| Stopping distance (unloaded) | mm | 6000 |
| Tire(F/B) | 300-15-18PR/7.00-12-12PR | |
| Engine displacement | L | 4.58 |
| Rate power/speed | kw/rpm | 57/2200 |
| Engine rate torque | nm/rpm | 285/1300-1500 |
| Fule tank capacity | L | 80 |
| Total weight | KG | 6900 |
NO3.CERTIFICATION
5ton hydraulic DIESEL FORKLIFT CPCD50L
